• 100 Queen St W, Brampton, ON L6X 1A4, Canada
  • +1-800-961-0337
START DATE END DATE CLASS TIMINGS MODE LOCATION ACTION
11/05/2018 11/07/2018
  • VLT
Live Online
11/12/2018 11/14/2018
  • VLT
Live Online
12/03/2018 12/05/2018
  • VLT
Live Online

Cisco Deploying Basic Wireless LANs (WDBWL v1.2)

Course Overview

After finishing this course, the student will have the capacity to meet these general goals:

Separate the attributes of a brought together remote LAN design, and arrange and test the controllers, get to focuses, and essential highlights

Separate the qualities of a FlexConnect design, arrange and send a FlexConnect based remote LAN

Perform routine support, organize observing, and normal investigating assignments on the Cisco remote LAN

Depict and perform arrangement without hardly lifting a finger of Use wizard, and best practices review

Prerequisites

The information and abilities that a student must have before going to this course are as per the following:

Earlier fruition of the Cisco Wireless LAN Essentials eLearning course

Tap on the above connection to agree to accept the WLE course

Information of fundamental systems administration standards, TCP/IP, spanning, steering convention, and VLAN task

Cisco CCNA? affirmation or identical work involvement

Fundamental Microsoft Windows, Windows systems administration, and Internet program route abilities

Cisco Deploying Basic Wireless LANs (WDBWL v1.2)

Course Outline

Module 1: Unified Deployments

Lesson 1: Performing the Initial Wireless LAN Controller Configuration

Beginning Setup

Cisco Ease of Use?Overview

Associate with the WLC Web Interface

IPv6 Support

Synopsis

Lesson 2: Describing Unified AP Modes of Operation

AP Operational Modes

AP Local Mode

AP Monitor Mode

AP Rogue Detector Mode

AP Sniffer Mode

AP Bridged Mode

AP SE-Connect Mode

AP FlexConnect Mode

OfficeExtend

Synopsis

Lesson 3: Understanding the AP Association Process

AP Discovery and Join Process

AP Join Order

AP Failover Process

Synopsis

Lesson 4: User Interfaces to the System

Cisco WLC Settings

Design Settings Located Under the WLANs Heading

Design Settings Located Under the Controller Heading

Design Settings Located Under the Wireless Heading

Design Settings Located Under the Security Heading

Design Settings Located Under the Management Heading

Cisco WLC CLI Settings

Utilizing the Cisco Prime Infrastructure for WLC Configuration

Synopsis

Lesson 5: Radio Resource Management and CleanAir

Split MAC Architecture

Radio Resource Management

Cisco CleanAir Implementation

Cisco CleanAir Concepts

Air Quality Configuration and Reporting

Cisco CleanAir-Enabled RRM

8.1 WiFi Interference Awareness (EDRRM)

Synopsis

Lesson 6: Administering WLANs and AP Groups

Remote LANs

Aloof Clients

AP Groups

RF Profiles

Synopsis

Lesson 7: Configuring Mobility Groups and Roaming

The Terminology of Roaming

Remote Roaming Concepts

Auto-stay Mobility

Static IP Mobility

Synopsis

Lesson 8: Configuring Security Options

Designing the Local Database

Macintosh Filtering

Access Control Lists

Shared Blocking Mode

Arranging RADIUS Authentication

Nearby EAP

LDAP Configuration

Controlling AP Association through AP Authentication

Cisco TrustSec for Wireless

Administration Frame Protection

802.11w Brings a Standards Based MFP arrangement

Wi-Fi Direct

Security Policy Logic

Arranging WLANS with Enterprise Security

Outline

Lesson 9: Performing General Administration

System Routes

Cisco Discovery Protocol

DHCP Services

Multicast Services

Multicast Video Delivery Challenges

Advancing Need for Video over WLAN

mDNS otherwise known as Bonjour Gateway

Application Visibility and Control (AVC)

Updates to AVC

Rundown

Lesson 10: Providing Guest Access

Characterizing Guest Access

Techniques for Providing Guest Access

Rundown

Module 2: Deploying The FlexConnect Architecture

Lesson 1: FlexConnect Deployments

Remain solitary Mode

Nearby Authentication

Split Tunneling

Synopsis

Lesson 2: FlexConnect Configuration and Operation

Quick Roaming

AAA Override

Shared

FlexConnect ACLs

FlexConnect Groups

Synopsis

Lesson 3: 8.1 FlexConnect Enhancements

8.1 AVC FlexConnect Overview

8.1 FlexConnect Group VLAN Support

8.1 FlexConnect AAA Override of VLAN Name

8.1 FlexConnect Client Debugging on AP

Synopsis

Module 3: Maintaining and Troubleshooting a Cisco Wireless LAN

Lesson 1: Performing Routine Maintenance

Find Key Controller Information

Find Key AP Information

Overhaul Controller Code

AP Pre-Image Download

WLC Administration

AP Administration

Synopsis

Lesson 2: Configuring Policies and Management

Remote Protection Policies

Overseeing Rogue Devices

Interruption Detection Management

Forceful Load Balancing

Checking Clients

Confirming Client Connectivity

Synopsis

Lesson 3: Gathering Data

Social affair Wireless Network Performance Data

Utilizing the AP to Gather Packets

Message Logging

WLC Statistics

Observing Clients

Synopsis

Lesson 4: Troubleshooting in a Cisco Unified Wireless Network

Characterize a Methodology

PoE issues with more up to date air conditioning APs

AP Association Troubleshooting

Investigation Tools Available in a Cisco Unified Wireless Network

Utilizing WLC CLI and GUI Commands for Troubleshooting

Synopsis

Module 4: Cisco User Interface Enhancements

Lesson 1: Ease of Use Features

Usability Features - Overview

Advancement

Design

Best Practices Audit

Synopsis

Module 5: Appendix

Lesson 1: Cisco Wireless LAN Essentials Refresher

Essential Networking and Wireless LAN Terms, Concepts, and Protocols (A Review)

Cisco Wireless LAN Architectures

Finding Key Documentation

Exploring Cisco Wireless LAN Characteristics

Cisco Wireless LAN Security

Lesson 2: Pre-Deployment Planning

Arranging a Pre-Deployment

Arranging Tools

Putting an AP

Lesson 3: Autonomous Deployments

Arranging an AP

Self-ruling AP Modes of Operation

8.0 Autonomous AP Features

8.1 Autonomous AP Features

Different Autonomous APs

Lab Outline

Guided Lab 1: Perform the Initial Controller Configuration

Guided Lab 2: Unified AP Modes of Operation

Guided Lab 3: AP Association Options

Guided Lab 4: Controller Web Interface

Guided Lab 5: RRM and CleanAir Configuration

Guided Lab 6: Configuring Security Parameters on the WLC

Guided Lab 7: AVC Configuration

Guided Lab 8: Configuring Basic B2C Guest Access and Web Authentication

Guided Lab 9: FlexConnect Local Switching

Guided Lab 10: Perform the Controller Configuration Using the Ease of Use Setup Wizard

Awards