• 100 Queen St W, Brampton, ON L6X 1A4, Canada
  • +1-800-961-0337
START DATE END DATE CLASS TIMINGS MODE LOCATION ACTION
No Classes Available in this Courses.

Implementing Cisco IP Telephony & Video, Part 2 (CIPTV2 v1.0)

Course Objectives

After finishing this course, the student will have the capacity to meet these general targets:

  • Portray multisite organization issues and arrangements, and depict and design required dial design components
  • Actualize call-preparing flexibility in remote destinations by utilizing Cisco Unified SRST and MGCP fallback
  • Actualize transmission capacity administration and CAC to anticipate oversubscription of the IP WAN
  • Actualize Device Mobility, Cisco Extension Mobility, and Cisco Unified Mobility
  • Actualize Cisco VCS Control and Cisco Expressway Series
  • Portray and execute CCD and ILS

Implementing Cisco IP Telephony & Video, Part 2 (CIPTV2 v1.0)

Course Outline

Module 1: Multisite Deployment Implementation

Lesson 1: Identifying Issues in a Multisite Deployment

  • Multisite Deployment Issues Overview
  • Quality Issues
  • Data transfer capacity Issues
  • Accessibility Issues
  • Outline of Dial Plan Issues
  • Settled Length versus Variable-Length Numbering Plans
  • Improved Call Routing and PSTN Backup
  • Covering and Nonconsecutive Numbers
  • PSTN Requirements
  • Dial Plan Scalability Issues
  • NAT and Security Issues

Lesson 2: Identifying Multisite Deployment Solutions

  • Multisite Deployment Solution Overview
  • Nature of Service
  • Review of Solutions to Bandwidth Limitations
  • Low-Bandwidth Codecs and RTP-Header Compression
  • Nearby Conference Bridges
  • Transcoders
  • Blended Conference Bridge
  • Multicast MOH from Branch Router Flash
  • Call Admission Control
  • Accessibility Overview
  • PSTN Backup
  • MGCP Fallback: Normal Operation
  • Fallback for IP Phones: Normal Operation
  • Call Forward Unregistered
  • Computerized Alternate Routing
  • Portability Solutions
  • Review of Dial Plan Solutions
  • NAT and Security Solutions

Lesson 3: Implementing a +E.164-based Dial Plan for International Multisite Deployments

  • Review of Multisite Connection Options
  • Taste Trunk Review
  • H.323 Trunks
  • Trunk Implementation Overview
  • Multisite Dial Plan Overview
  • Actualizing Site Codes for On-Net Calls
  • Actualizing PSTN Access
  • Actualizing Selective PSTN Breakout
  • Actualizing PSTN Backup for On-Net Intersite Calls
  • Actualizing TEHO
  • Globalized Call Routing Overview
  • Globalization of Localized Call Ingress on Gateways
  • Confined Call Egress
  • Globalized Call Routing Examples

Lesson 4: Implementing a URI-Based Dial Plan for Multisite Deployments

  • URI Dialing Overview
  • URI Endpoint Addressing Review
  • URI Partitions and CSSs Review
  • URI Call Sources Review
  • Mixed Addressing
  • FQDNs in Directory URIs
  • URI Call Routing

Module 2: Centralized Call-Processing Redundancy Implementation

Lesson 1: Implementing SRST and MGCP Fallback

  • Remote Site Redundancy Overview
  • MGCP Fallback Operation
  • Cisco Unified SRST Operation
  • Cisco Unified Communications Manager Express in SRST Mode
  • Dial Plan Requirements for MGCP Fallback and Cisco Unified SRST Scenarios

Module 3: Bandwidth Management and CAC Implementation

Lesson 1: Managing Bandwidth

  • Data transmission Management Options
  • Cisco Unified Communications Manager Codec Configuration
  • Nearby Conference Bridge Implementation

Lesson 2: Implementing CAC

  • CAC Overview
  • Improved Location CAC Characteristics
  • Intracluster Enhanced Location CAC
  • Intercluster Enhanced Location CAC
  • Improved Location CAC Considerations
  • Computerized Alternate Routing

Module 4: Implementation of Features and Applications for Multisite Deployments

Lesson 1: Implementing Device Mobility

  • Issues with Devices Roaming Between Sites
  • Gadget Mobility Overview
  • Gadget Mobility Configuration Elements
  • Gadget Mobility Operation
  • Gadget Mobility Considerations
  • Gadget Mobility Interaction with Globalized Call Routing
  • Gadget Mobility Configuration

Lesson 2: Implementing Cisco Extension Mobility

  • Issues with Users Roaming Between Sites
  • Cisco Extension Mobility Overview
  • Cisco Extension Mobility Configuration Elements
  • Cisco Extension Mobility Operation
  • Cisco Extension Mobility Considerations
  • Cisco Extension Mobility Configuration

Lesson 3: Implementing Cisco Unified Mobility

  • Cisco Unified Mobility Overview
  • Cisco Unified Mobility Call Flows
  • Cisco Unified Mobility Implementation Requirements
  • Cisco Unified Mobility MGCP or SCCP Gateway PSTN Access
  • CSS Handling in Cisco Unified Mobility
  • Cisco Unified Mobility Access-List Functions

Module 5: Cisco VCS and Cisco Expressway

Lesson 1: Describing Cisco VCS and Cisco Expressway Series Deployment Options

  • Cisco VCS and Cisco Expressway Series Overview
  • Cisco VCS and Cisco Expressway Series Deployment Options
  • Cisco VCS and Cisco Expressway Series Platforms, Licenses, and Features
  • Cisco VCS and Cisco Expressway Clustering
  • Cisco VCS and Cisco Expressway Series Initial Configuration

Lesson 2: Deploying Users and Local Endpoints in Cisco VCS Control

  • Client Authentication Options
  • Endpoint Registration
  • Endpoint Authentication
  • Cisco TMS Provisioning
  • Zones
  • Connections
  • Channels

Lesson 3: Interconnecting Cisco Unified Communications Manager and Cisco VCS

  • Cisco Unified Communications Manager and Cisco VCS Interconnection Overview
  • Call Flow between Cisco Unified Communications Manager and Cisco VCS
  • Cisco VCS Dial Plan Components
  • Design of Cisco Unified Communications Manager and Cisco VCS Interconnections
  • FindMe Configuration Procedure

Lesson 4: Implementing Unified Communications Mobile and Remote Access

  • Bound together Communications Mobile and Remote Access Overview
  • Bound together Communications Mobile and Remote Access Components
  • Bound together Communications Mobile and Remote Access Operations
  • Bound together Communications Mobile and Remote Access Configuration Procedure

Module 6: GDPR and CCD

Lesson 1: Implementing ILS and GDPR

  • ILS Overview
  • ILS Networking
  • GDPR Overview
  • ILS Network Configuration Procedure
  • Trade of Directory URIs
  • Design of Directory URI Exchange
  • Trade of Numbers and Patterns
  • Design of Number and Pattern Exchange
  • Import and Export of Global Dial Plan Catalogs

Lesson 2: Implementing CCD

  • SAF and CCD Overview
  • SAF Characteristics
  • CCD Characteristics
  • CCD Operation
  • Observing Learned Routes
  • Cisco Unified SRST Considerations
  • Contemplations When Using Globalized Call Routing
  • Trunk Considerations
  • Contemplations When Using Clustering Over the WAN
  • SAF and CCD Implementation Overview
  • Design SAF and CCD

Lab Outline

Guided Lab 1: Implementing a +E.164-Based Dial Plan for International Multisite Deployments

  • Design Partitions and CSSs
  • Execute H.323 and MGCP Gateways and Configure SIP Intercluster Trunks
  • Design Inbound and Outbound PSTN Calls for the HQ Cluster
  • Design Inbound and Outbound PSTN Calls for the BR1 Cluster
  • Execute Internal Dialing

Guided Lab 2: Implementing a URI-Based Dial Plan for Multisite Deployments

  • Executing URI Dialing Within the HQ Cluster
  • Execute URI Call Routing Between the HQ, BR1, and BB Clusters

Equipment Lab 3: Implementing SRST and MGCP Fallback

  • Design SRST Gateways in Cisco Unified Communications Manager
  • Design a Cisco IOS Gateway for MGCP Fallback and SRST
  • Execute a Dial Plan in Cisco Unified Communications Manager Supporting Outbound Calls During SRST Mode
  • Execute a Dial Plan at the SRST Gateway Supporting Inbound and Outbound Calls When in MGCP Fallback or in SRST Mode or Both

Equipment Lab 4: Implementing Bandwidth Management

  • Empower a Software Conference Bridge
  • Design Regions
  • Execute Transcoders
  • Execute a Hardware Conference Bridge

Equipment Lab 5: Implementing Enhanced Location CAC

  • Execute Enhanced Location CAC

Equipment Lab 6: Implementing Device Mobility

  • Arrange Device Mobility

Equipment Lab 7: Implementing Extension Mobility

  • Arrange Extension Mobility

Equipment Lab 8: Implementing Cisco Unified Mobility

  • Arrange Mobile Connect
  • Arrange MVA

Equipment Lab 9: Configuring Cisco VCS Control to Register Endpoints

  • Perform Initial Cisco VCS Control Configuration
  • Empower Provisioning on the Cisco TMS Server and Cisco VCS Control
  • Arrange a Subzone for Cisco Jabber Video for TelePresence Clients

Equipment Lab 10: Implementing a Dial Plan in Cisco VCS Control to Interconnect with Cisco Unified Communications Manager

  • Arrange Cisco Unified Communications Manager to Connect with Cisco VCS
  • Arrange Cisco VCS to Connect with Cisco Unified Communications Manager
  • Arrange Bandwidth Limitations Between Cisco VCS and Cisco Unified Communications Manager
  • Arrange FindMe for Cisco Jabber Video for TelePresence Clients

Equipment Lab 11: Implementing Mobile and Remote Access through Cisco Expressway

  • Actualize Support for Internal Cisco Jabber Clients
  • Arrange Initial Settings on Cisco Expressway Series
  • Arrange Mobile and Remote Access on Cisco Expressway Series
  • Arrange a Secure Traversal Zone Connection for Cisco Unified Communications
  • Arrange Cisco Jabber to Regis

Prerequisites

The information that you ought to have before going to this course ought to incorporate the accompanying:

  • Working information of merged voice, video, and information systems
  • Working learning of the MGCP, SIP, and H.323 conventions and their usage on Cisco IOS doors
  • Capacity to design and work Cisco switches and switches
  • Capacity to design and work Cisco Unified Communications Manager in a solitary site condition

Awards